Baseboard Heat Covers

As an Amazon Associate VentCoversPro.com may earn a commission from qualifying purchases.

The Best Baseboard Register Covers

Baseboard heat registers are an essential element of the HVAC system in the home. They help keep the ducts clear by helping to prevent things from falling into the duct opening while still allowing for a free flow of air. Some registers also come with a louvered design, allowing homeowners to close off ducts in underused rooms to easily save on energy costs.
Not to mention, they certainly look much better than having a hole in the floor or wall!

Bestseller No. 1
Accord ABBBWHB15 Baseboard Register with Wicker Design, 15-Inch(Duct Opening Measurement), White
  • Solid steel face and premium plated finish
  • For floor application
  • Volume control damper
  • Listed product sizes refer to the duct opening measurements, not the register itself
  • Actual length of item is 15-inches; inside duct opening measurement of item is 12-inches to accommodate the 1 ½-inch wide flanges on each end
Bestseller No. 2
Accord ABBBWH15 Baseboard Register with Sunburst Design, 15-Inch(Duct Opening Measurement), White
  • Steel construction
  • For floor application, 2-3/4-in projection
  • 180˚ air deflection with a volume control damper
  • Removable faceplate for easy installation and cleaning
  • Actual length of item is 15-inches; inside duct opening measurement of item is 12-inches to accommodate the 1 ½-inch wide flanges on each end
Bestseller No. 3
30"w X 6"h Steel Return Air Grilles - Sidewall and Ceiling - HVAC Duct Cover - White [Outer Dimensions: 31.75"w X 7.75"h]
  • 30"w X 6"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 31.75" Width X 7.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
  • HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
  • QUALITY PACKAGING - Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality
  • HEAVY STEEL CONSTRUCTION - No Scuff Powder Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
  • UNRESTRICTED AIRFLOW For Your HVAC System - 50° Angled To Provide Maximum Airflow – ½ Inch Spaced Fins
Bestseller No. 4
32" x 8" Return Air Grille - Sidewall and Ceiling - HVAC Vent Duct Cover Diffuser - [White] [Outer Dimensions: 33.75w X 9.75"h]
  • 32"w X 8"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 33.75" Width X 9.75" Height - SEE IN DESCRIPTION HOW TO MEASURE A GRILLE PROPERLY
  • High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
  • Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
  • Easy Unrestricted Air Flow For Your HVAC System - 50° angled to provide maximum airflow
  • Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Bestseller No. 5
Accord APBBDF Adjustable 15-Inch to 24-Inch x 4-1/2-Inch Magnetic Baseboard Air Deflector
  • Adjustable from 15-in to 24-in
  • Easy magnetic installation
  • Improves heating and cooling
  • Sticks to steel baseboard registers
  • For use with forced central air systems
Bestseller No. 6
Accord AOBBOL18 Oak Baseboard Register, 18-Inch(Duct Opening Measurement), Light Finish
  • Solid oak construction; Premium stain and durable lacquer finish
  • Color may vary slightly based on the underlying wood product
  • For floor application; wood flap damper adjusts air flow
  • Listed product sizes refer to the duct opening measurements, not the register itself
  • Actual length of item is 18-inches; inside duct opening measurement of item is 15-inches to accommodate the 1 ¾ -inch wide flanges on each end
Bestseller No. 7
SteelCrest BTU15BBSWH Bronze Series Designer Baseboard Vent with Air-Volume Damper, White
  • Made to replace 15 inch long baseboard vent
  • Color matched mounting screws provided for seamless beauty
  • Tough powder coat finish (may be painted to match wall/ceiling color)
  • Elegant but understated design that compliments any home décor
  • For best results we recommend painting all ductwork black before install
Bestseller No. 8
Mintcraft Bb-18w Baseboard Register White 18in
  • 18" white baseboard register
  • Made of painted stamped steel with a sunburst pattern
  • 3" base extension with screws
  • Width of top of product is 3”; bottom of product for venting hole is 2-3/4”
Bestseller No. 9
Vintage White Steel Baseboard Registers - 15" X 12" Outside Dimensions
  • White Powder Coated Steel Gravity Baseboard Vents
  • Gravity vent that fits 15" x 12" overall or a hole at least 12" x 8"
  • This gravity vent has a flap damper to allow maximum air flow
  • Top projection is 1" out from wall and 2.5" out from wall
  • Replace the hard to find and beat up old vent...Finally
Bestseller No. 10
Imperial 14" x 6" Painted Metal Baseboard Grille, White, RG0033
  • One-piece all-steel construction
  • 1/3" fins set at 20-degree angle
  • 7/8" margin turnback
  • Painted grills have a durable powder-coat finish
magnetic vent covers on amazon

HOT PRODUCT: Magnetic Covers

  • Double Thickness
  • Save Money On Energy
  • Fits Your Vents Perfectly
  • Cut To Any Shape Or Size

Aesthetically Pleasing

Baseboard heat covers come in a wide range of colors and materials, making them suitable to fit any decoration scheme. Choose from baseboard vent covers made of steel, wood, or even plastic. Some covers even come with a plated finish to give them a unique look without breaking the bank. For example, a steel cover with an antique brass plated finish.

Homeowners can even find vintage versions of baseboard registers for older homes. Then, the baseboard register becomes not only practical but also adds to the historic/vintage feel of the home.

The best part is that these covers come at an affordable price. To make them even more budget-friendly, choose a simple design. But even fancier ones are not that expensive, so feel free to have fun picking out something a little more exciting!

Easy to Install

Baseboard register covers are easy to install. In most cases, there are no special tools required and it is simply a matter of snapping it into place. Some models have a removable front plate to facilitate cleaning.

Please keep in mind when choosing sizes that most products are listed according to duct size, not the actual product size. Varying flange sizes can make the product bigger or smaller around the duct opening according to the homeowner’s preference.

Be sure to measure the duct opening and not the old baseboard register to ensure accuracy.

Ready to pick out your new baseboard heat registers? Check out our extensive selection!

People Also Searched For:

baseboard register, baseboard heat covers, baseboard registers, baseboard register covers, baseboard vent covers, baseboard registers for older homes, baseboard vent, baseboard heat registers, baseboard heater registers, baseboard heating register, baseboard vents, baseboard heat cover, baseboard heat register, baseboard heating registers, baseboard return air grille, baseboard designs, baseboard register vents, baseboard return air grilles, baseboard diffuser 18 inch, baseboard diffuser 24 inch, baseboard registers home depot, baseboard return

Scroll to Top