Air Intake Vent Covers

As an Amazon Associate VentCoversPro.com may earn a commission from qualifying purchases.

The Best Air Intake Grilles

Air intake covers are easy to install with just a screwdriver, which many homeowners already have on hand. Most covers can be used on an air intake vent in either the ceiling or on a sidewall.

When choosing the size of your air intake grate, be aware that the sizing listed is for the duct opening. The size of the air intake vent cover itself will be a little larger. Also, the first number is the width and the second number is the height.

Browse our selection of sturdy, handsome air intake vent covers here!

Bestseller No. 1
Accord ABRFWH2020 Return Filter Grille with 1/2-Inch Fin Louvered, 20-Inch x 20-Inch(Duct Opening Measurements), White
  • Steel construction, 1/2-in spaced fins
  • For sidewall or ceiling application
  • Removable hinged face accepts nominal 1-in thick filters for easy installation and cleaning
  • The number of louvered columns and mounting holes will vary based on the size of the grille ordered
  • Listed product sizes refer to the duct opening measurements, not the register itself
Bestseller No. 2
12" X 12" Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC Duct Cover - Flat Stamped Face -White [Outer Dimensions: 13.75w X 13.75h]
  • Beautiful and Sturdy
  • High Quality Solid Stamped steel and No Sharp Edges
  • Our Filter Grille Latch is Easy To Use On Your Fingers And Requires No Screwdriver To Open.
  • Removable Door/Face For Easy Filter Change & Cleaning - Uses a 1" Thick Filter
  • Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Bestseller No. 3
20" X 20" Steel Return Air Filter Grille [Removable Face Door] for 1-inch Filters HVAC Duct Cover Grill, White | Outer Dimensions: 22 5/8"W X 22 5/8"H for 20x20 Duct Opening
  • Always measure the wall opening to determine which size you should order. Wall Opening Size = Listed Grille Size. If the hole on the wall is 20"(W)x20"(H) please order a 20"x20" grille.
  • Handua Return Air Filter Grille used for sidewall or ceiling openings. Our Return Air Filter Grilles do not require screwdriver to open, you can easily open the latch with a finger move.
  • The door/face is removable for easy filter change and cleaning, this Grill uses a 1" thick filter (not included).
  • Using our Return Air Filter Grille within your ventilation system will improve your home circulation. The steel is stamped so there is no sharp edges.
  • Durable white powder coated, high quality steel removable face allows easy access to replace air filter.
Bestseller No. 4
16"w X 16"h Steel Return Air Grilles - Sidewall and Ceiling - HVAC Duct Cover - White [Outer Dimensions: 17.75"w X 17.75"h]
  • 16"w X 16"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 17.75" Width X 17.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
  • HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
  • QUALITY PACKAGING - Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality
  • HEAVY STEEL CONSTRUCTION - No Scuff Powder Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
  • UNRESTRICTED AIRFLOW For Your HVAC System - 50° Angled To Provide Maximum Airflow – ½ Inch Spaced Fins
SaleBestseller No. 5
24" X 24" Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC Duct Cover - Flat Stamped Face - White [Outer Dimensions: 26.5 X 25.75]
  • 24" X 24" Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 26.5 X 25.75]
  • High Quality Solid Stamped Steel - No Sharp Edges
  • EASY TO USE - Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open After Installation, Just Open and Close Latche
SaleBestseller No. 6
20" X 20" Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC Duct Cover - Flat Stamped Face - White [Outer Dimensions: 22.5 X 21.75]
  • 20" X 20" Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 22.5 X 21.75]
  • High Quality Solid Stamped Steel - No Sharp Edges
  • EASY TO USE - Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open After Installation, Just Open and Close Latche
Bestseller No. 7
18" X 18" Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC Duct Cover - Flat Stamped Face - White [Outer Dimensions: 20.5 X 19.75]
  • 18" X 18" Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 20.5 X 19.75]
  • High Quality Solid Stamped Steel - No Sharp Edges
  • EASY TO USE - Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open After Installation, Just Open and Close Latche
Bestseller No. 8
24" X 12 Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC Duct Cover - Flat Stamped Face - White [Outer Dimensions: 26.5 X 13.75]
  • 24" X 12 Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 26.5 X 13.75]
  • High Quality Solid Stamped Steel - No Sharp Edges
  • EASY TO USE - Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open After Installation, Just Open and Close Latche
Bestseller No. 9
30"w X 6"h Steel Return Air Grilles - Sidewall and Ceiling - HVAC Duct Cover - White [Outer Dimensions: 31.75"w X 7.75"h]
  • 30"w X 6"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 31.75" Width X 7.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
  • HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
  • QUALITY PACKAGING - Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality
  • HEAVY STEEL CONSTRUCTION - No Scuff Powder Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
  • UNRESTRICTED AIRFLOW For Your HVAC System - 50° Angled To Provide Maximum Airflow – ½ Inch Spaced Fins
Bestseller No. 10
20" X 30" Steel Return Air Filter Grille for 1" Filter - Removable Face/Door - HVAC Duct Cover - Flat Stamped Face -White [Outer Dimensions: 21.75w X 31.75h]
  • Beautiful and Sturdy
  • High Quality Solid Stamped steel and No Sharp Edges
  • Our Filter Grille Latch is Easy To Use On Your Fingers And Requires No Screwdriver To Open.
  • Removable Door/Face For Easy Filter Change & Cleaning - Uses a 1" Thick Filter
  • Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
magnetic vent covers on amazon

HOT PRODUCT: Magnetic Covers

  • Double Thickness
  • Save Money On Energy
  • Fits Your Vents Perfectly
  • Cut To Any Shape Or Size

Air intake vent covers are more than just a covering for that big hole that is the air intake vent. They help extend the life of the HVAC system and keep the air in the home cleaner and fresher.

Aesthetics and Durability

With heavy-duty steel construction, air intake vent covers are built to last. As a bonus, many models use stamped steel which offers a smooth finish with no sharp edges.

The powder coat finish makes it scratch resistant and gives it a shiny, just-been-waxed appearance.

Easy Airflow and Filtering

Quality air intake grill covers allow unrestricted airflow for your HVAC system. However, they don’t just cover the opening, they also have a filter inside. This helps keep pollutants like dust, pet dander, and allergens out of the air in the home.

Changing the filter is easy, many models don't even require a screwdriver to open the cover. Simply pop off the cover, change out the filter, and pop the cover back into place.

Dirty air can clog up HVAC systems and cause them to work harder. Changing the filter out regularly helps keep the entire HVAC system functioning better. This will both extend the life of the system as well as provide savings on monthly energy bills.

People Also Search For:

air intake vent, air intake vent cover, air intake cover, air intake grill, air intake covers, air intake grate, air intake vents, air intake cover vent, air intake cover wall, air intake grille, air intake vents home, air intake grill covers, air intake register, air intake grille covers, air intake register cover, air intake vents wall

Scroll to Top