Air Return Grille

As an Amazon Associate VentCoversPro.com may earn a commission from qualifying purchases.

The Best Air Return Grilles

Without an air return, HVAC systems would essentially suffocate.

Everyone knows about the vents that push hot or cold air into the room, but what do those other vents do that are near or on the floor?

In order to push air into a room, the air already in the room needs a place to go. That’s what these additional vents are for. Depending on the system, the air either goes outside or returns to the system to be heated or cooled.

Using an air return grille, along with a filter, is important to keep the air clean going into the HVAC system — thus extending the life of the system and saving money on maintenance and repairs.

Bestseller No. 1
EZ-FLO 61628, White Return Air Grille, 14 inch (W) x 6 inch (H) Opening, 14" x 6"
  • The return air grille measures 15-3/4 inch (W) x 7-3/4 inch (L) with a duct opening of 14 inch (W) x 6 inch (L); 2 vent rows
  • Constructed of heavy-duty steel that provides strength and durability
  • The grille features a powder-coated white finish that resists flaking, scratching and fading
  • Can be installed in both sidewall and ceiling locations
  • Designed to improve air ventilation in HVAC systems
Bestseller No. 2
Accord ABRFWH2020 Return Filter Grille with 1/2-Inch Fin Louvered, 20-Inch x 20-Inch(Duct Opening Measurements), White
  • Steel construction, 1/2-in spaced fins
  • For sidewall or ceiling application
  • Removable hinged face accepts nominal 1-in thick filters for easy installation and cleaning
  • The number of louvered columns and mounting holes will vary based on the size of the grille ordered
  • Listed product sizes refer to the duct opening measurements, not the register itself
Bestseller No. 3
Venti Air 24" X 12" Steel Return Air Filter Grille - Free 2-3 Business Day Delivery [Outer Dimension: 26.5"W X 14.5" H]
  • How to Select filter grille: Measure the Dry wall opening. The Listed size corresponds to the dry wall opening dimensions. Listed size = Dry wall opening size (width X height). The Outside dimensions = Listed Size + 2.5 In. Please refer to Selection guide for more details.
  • How to install filter grille: Using the latches, remove the top cover and screw in the frame in the wall/ceiling using built in tabs. Place the filter and attach the top cover using hinges at the bottom. Finally secure the top cover using the latches at the top. Please refer to Installation guide for more details.
  • Free 3 business day shipping: All the filter grilles come with free 3 business day shipping. Please refer to attached map for more details.
  • Removable top cover: All the filter grilles come with durable latches and hinges. To remove the top cover and ease of installation.
  • Included accessories: All the filter grilles come with screws required for installation.
Bestseller No. 4
24"w X 24"h Steel Return Air Grilles - Sidewall and Ceiling - HVAC Duct Cover - White [Outer Dimensions: 25.75"w X 25.75"h]
  • 24"w X 24"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 25.75" Width X "w X 25.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
  • HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
  • QUALITY PACKAGING - Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality
  • HEAVY STEEL CONSTRUCTION - No Scuff Powder Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Bestseller No. 5
16" X 16" Steel Return Air Filter Grille for 1" Filter - Easy Plastic Tabs for Removable Face/Door - HVAC Duct Cover - Flat Stamped Face - White [Outer Dimensions: 17.75 X 17.75]
  • 16"w X 16"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 17.75" Width X 17.75" Height - SEE IN DESCRIPTION HOW TO MEASURE A GRILLE PROPERLY
  • High Quality Solid Stamped steel - No Sharp Edges
  • Our Filter Grille Latch is Easy To Use On Your Fingers And Requires No Screwdriver To Open.
  • Removable Door/Face For Easy Filter Change & Cleaning - Uses a 1" Thick Filter
  • QUALITY PACKAGING & SATISFACTION GUARANTEED- Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality - 100% Satisfaction Guaranteed, Don’t worry you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart now and enjoy a new updated refreshing look to your home
Bestseller No. 6
Venti Air 14" X 25" Steel Return Air Filter Grille - Free 2-3 Business Day Delivery [Outer Dimension: 16.5"W X 27.5" H]
  • How to Select filter grille: Measure the Dry wall opening. The Listed size corresponds to the dry wall opening dimensions. Listed size = Dry wall opening size (width X height). The Outside dimensions = Listed Size + 2.5 In. Please refer to Selection guide for more details.
  • How to install filter grille: Using the latches, remove the top cover and screw in the frame in the wall/ceiling using built in tabs. Place the filter and attach the top cover using hinges at the bottom. Finally secure the top cover using the latches at the top. Please refer to Installation guide for more details.
  • Free 3 business day shipping: All the filter grilles come with free 3 business day shipping. Please refer to attached map for more details.
  • Removable top cover: All the filter grilles come with durable latches and hinges. To remove the top cover and ease of installation.
  • Included accessories: All the filter grilles come with screws required for installation.
Bestseller No. 7
24"w X 14"h Steel Return Air Grilles - Sidewall and Ceiling - HVAC Duct Cover - White [Outer Dimensions: 25.75"w X 15.75"h]
  • 24"w X 14"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 25.75" Width X "w X 15.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
  • High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
  • Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
  • Easy Unrestricted Air Flow For Your HVAC System - 50° angled to provide maximum airflow
Bestseller No. 8
Decorative Grille, Vent Cover, or Return Register. Made of Urethane Resin to fit Over a 20"x30" Duct or Opening. Total Size of Vent is 22”x32"x3/8", for Wall and Ceiling grilles (not for Floor use).
  • Incredible three dimensional detail of grille (see expanded view), not just hole punched sheet metal. Our urethane resin cast grilles are equal in surface quality to Investment casting or lost wax casting quality at a fraction of the cost. Much superior to the rough and grainy looking surfaces of cast iron or cast aluminum grilles.
  • Maintenance free, you should not have to re-finish, remove rust, corrosion or mold for life of our exterior grade urethane resin grilles. Can be used in damp or wet locations, like exteriors, bathrooms, kitchens and indoor swimming pools or the other rooms on the same HVAC system as the pool room. Frequently used to replace unattractive exhaust fan covers in bathrooms.
  • Easy installation, Pre-drilled screw holes and all necessary hardware provided. Our grilles are flat on the back, with no protrusion that needs to fit into the duct-work. Just place over duct, level and screw in. See attached “spec sheet” with drawing, measurements, Material Technical Data on resin, plus Free Air Flow and other information.
  • Our grilles will also reduce or eliminate the irritating high pitched noise problems often found with stamped steel louvered return grilles. Urethane resin grilles will not vibrate and make noise like metal grilles do. Use our grilles to replace noisy high pitched metal return grilles, your ears will be glad you did.
  • Arts & Crafts Style Grille; historic reproduction of possibly the best looking grille ever made in USA, Circa 1870's Use to replace old louvered grilles for wall & ceiling only (not for floors). Meets U.S. Government’s General Services Administration code #1501003S standards for Historic Preservation Guidelines, for grilles in historic buildings. Use these grilles in new homes that want the traditional look or historic homes that need to preserve their vintage character.
Bestseller No. 9
Accord ABRGWH146 Return Grille with 1/2-Inch Fin Louvered, 14-Inch x 6-Inch(Duct Opening Measurements), White
  • Measure the duct opening to determine the correct size, not the outside of the grille
  • Listed product size refers to the duct opening measurements
  • Steel construction with 1/2-in spaced fins
  • For wall or ceiling application
  • 14-in x 6-in is the size of the duct opening dimensions, the grille itself measures 15.7-in x 7.7-in
Bestseller No. 10
Venti Air 20" X 30" Steel Return Air Filter Grille - Free 2-3 Business Day Delivery [Outer Dimension: 22.5"W X 32.5" H]
  • How to Select filter grille: Measure the Dry wall opening. The Listed size corresponds to the dry wall opening dimensions. Listed size = Dry wall opening size (width X height). The Outside dimensions = Listed Size + 2.5 In. Please refer to Selection guide for more details.
  • How to install filter grille: Using the latches, remove the top cover and screw in the frame in the wall/ceiling using built in tabs. Place the filter and attach the top cover using hinges at the bottom. Finally secure the top cover using the latches at the top. Please refer to Installation guide for more details.
  • Free 3 business day shipping: All the filter grilles come with free 3 business day shipping. Please refer to attached map for more details.
  • Removable top cover: All the filter grilles come with durable latches and hinges. To remove the top cover and ease of installation.
  • Included accessories: All the filter grilles come with screws required for installation.
magnetic vent covers on amazon

HOT PRODUCT: Magnetic Covers

  • Double Thickness
  • Save Money On Energy
  • Fits Your Vents Perfectly
  • Cut To Any Shape Or Size

Durability

Unless they are mounted on the floor, air return vent covers don’t necessarily see a lot of abuse. But that doesn’t mean that they can’t take it. Built from heavy-duty stamped steel, these covers are hardy yet smooth with no sharp edges.

The smooth, no-scuff powder coat finish is also scratch-resistant and has the look of being recently waxed.

Ease of Cleaning

An easy way to cut down on energy bills and maintenance costs is by using a 1-inch filter with all air return vents. As these filters are constantly accumulating contaminants, they need to be changed regularly.

These air return covers facilitate this by offering easy access. Simply pop off the removable face, change out the filter, and put the face back into place.

Ease of Installation

Installation is a cinch. With pre-drilled screw holes and the included screws, all homeowners need is a screwdriver to install the air return cover.

When choosing a new air return cover, homeowners should not base the size off the old cover, but rather the duct opening. Actual sizes will always be a little larger due to the flange that goes around the edge.

Take a moment to browse the selection here for a fantastic new air return grille that allows unrestricted airflow!

People Also Search For:

air return grille, air return vent, air return vent covers, air return, air return covers, air return filter, air return vent cover, air return vents, air return filter grille, air return vent cover with filter, air returns, air return cover, air return grill, air return grates, air return register, air return filters, air return grate, air return grilles, air return grille cover, air return grille decorative, air return vent covers decorative, air return grate cover, air return grille home depot, air return grille with filter, air return register grill, air return registers, air return register covers

Scroll to Top