Cold Air Return Covers

As an Amazon Associate VentCoversPro.com may earn a commission from qualifying purchases.

Best Cold Air Return Vents

Heating systems don’t just push hot air into a room, they also pull the cold air out of it. They do this through the cold air return part of their system.

Think of it like breathing. As the system “breathes out” hot air into a room, it “breathes in” cold air from the room. This cold air goes into the system to be heated and expelled once again into the room as warm air.

Like heating vents, homeowners don’t want gaping holes in their walls for the cold air return. That’s where cold air return covers come in.

Bestseller No. 1
Decor Grates PL814-WH 8-Inch by 14-Inch Cold Air Return, White
  • Plastic lattice design cold air return in white
  • Available in a variety of styles and finishes to match any decor
  • Economical solution for your home
  • Crafted for long trouble free operation; solid plastic grid construction
  • Dimensions 8x14" refer to wall opening, product extends past opening
SaleBestseller No. 2
Decor Grates ST614R Classic Collection Décor Design Painted, 6x14 Inches, Cold Air Return Register
  • Scroll Design steel painted - Powder coated textured black Finish cold air return
  • Included are painted screws for easy installation and a consistent look
  • The grate comes with pre drilled mounting holes
  • Available in a variety of sizes
  • Damper Box not included with any cold air returns
SaleBestseller No. 3
Decor Grates S614R-WH Cold Air Return Register, 6-Inch by 14-Inch, White, 5 Sq Ft
  • Scroll Design steel plated - Painted White Finish cold air return
  • Included are painted screws for easy installation and a consistent look
  • The grate comes with pre drilled mounting holes
  • Available in a variety of finished and sizes
  • Damper Box not included with any cold air returns
SaleBestseller No. 4
WELLAND 8 Inch x 16 Inch Red Oak Hardwood Register Cold Air Return Wall Vent, Unfinished
  • Overall dimensions 8"x16"
  • Unfinished air vents.
  • Made of Solid Red Oak
  • Cold air return register
  • Cold air return vents; Wood wall vents
Bestseller No. 5
Tru Aire 6 in. H x 24 in. W 1-Way Powder Coat White Steel Return Air Grille
  • "TA INDUSTRIES" RETURN GRILLE
  • Size: 24" x 6"
  • White powder coating
  • Counter-sunk screw holes with 2" screws
  • Each grille is individually shrinkwrapped
SaleBestseller No. 6
Rightline Gear Mid Size Short Bed Truck Tent (5')
  • UNIQUE FLOORLESS DESIGN: Cut down on set up time; the Truck Tent's floorless design allows for set up without removing gear from the bed.
  • 1 YEAR MANUFACTURER'S WARRANTY: Shop confidently; our service team is based in the USA & skillfully trained to help you with any questions or concerns.
  • QUALITY WEATHERPROOF CONSTRUCTION: Water resistant fabric with tape sealed seams (PU 2000mm) keeps you dry, while the Tent's heavy duty straps and nylon buckles won’t damage your truck's finish.
  • SLEEP UNDER THE STARS: Sky view vent allows for more light, better views, and ventilation.
  • ROOM FOR TWO: All truck tents comfortably sleep (2) adults; turn any spot into a comfortable campsite!
Bestseller No. 7
EZ-FLO 61628, White Return Air Grille, 14 inch (W) x 6 inch (H) Opening, 14" x 6"
  • SIDE WALL AND CEILING VENT: Air vent deflector features a grille opening which measures 14 x 6 inches (WxL), and an outer dimension of 15-3/4 x 7-3/4 inches (WxL); features 2 vent rows
  • COMPATIBILITY: Vent covers are designed for use in both sidewall and ceiling locations, and the steel grille provides an improved HVAC ventilation system that will ensure maximum airflow
  • DURABLE: EZ-FLO Return Air Grille is composed of heavy duty steel with a white powder-coated finish which is flake resistant and provides a longer-lasting performance
  • FUNCTIONALITY: This register vent cover is designed to improve air ventilation in HVAC systems that can be installed in both sidewall and ceiling locations
  • EASY TO INSTALL: Vent cover registers are easy to install, and includes 2 screws for installation
Bestseller No. 8
14" X 8" Baseboard Return Air Grille - HVAC Vent Duct Cover - 7/8" Margin Turnback for Flush Fit with Baseboard Work - White [Outer Dimensions: 15.75" Width X 9.75" Height]
  • 12" X 4"opening dimension (vent opening) - actual total grille size is approx 1.75" wider - SEE BELOW HOW TO MEASURE A GRILLE
  • Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
  • Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
  • Smooth Surface Edges - Run Your Fingers Across The Surface To Feel The Smoothness
  • Easy Unrestricted Air Flow For Your HVAC System - 7/8" margin turnback
Bestseller No. 9
White Baseboard Return Grill with 7/8" Turn Back (30" x 6" Duct Opening/ 31.25" x 7.5" Overall)
  • One piece all steel construction made by Imperial Manufacturing
  • Durable white powder coated finish
  • Made for baseboard use so there is a 7/8" turnback
  • 1/3" fins set at 20 degree angle; faceplate 1 1/4" larger then listed size
  • 1 baseboard grill for a 30 x 6 hole; Faceplate size - Approx. 31 1/4" x 7 1/4"
SaleBestseller No. 10
30"W x 6"H [Duct Opening Measurements] Steel Return Air Grille (HD Series) Vent Cover Grill for Sidewall and Ceiling, White | Outer Dimensions: 31.75"W X 7.75"H for 30x6 Duct Opening
  • Always measure the wall opening to determine which size you should order. Wall Opening Size = Listed Size. If the hole on the wall is 30"(W)x6"(H) please order the 30"x6" size option.
  • Handua Return Air Grille used for sidewall or ceiling openings.
  • Using our Return Air Grille within your ventilation system will improve your home circulation. The steel is stamped so there is no sharp edges.
  • Durable white powder coated, made of Heavy Duty steel.
magnetic vent covers on amazon

HOT PRODUCT: Magnetic Covers

  • Double Thickness
  • Save Money On Energy
  • Fits Your Vents Perfectly
  • Cut To Any Shape Or Size

Aesthetics

Cold air return vent covers come in a variety of styles from simple to delicately detailed. The simplest ones are made of steel finished off with a scratch-resistant, no-scuff, shiny powder coat finish. Others have a paintable white finish so that homeowners can easily match their cold air intake return grilles to their decor.

Fancy versions come with pretty scrollwork designs. These are suitable for any home, but are the perfect icing on the cake for Victorian or other historic home designs.

For those who want something a little warmer than steel, consider a beautiful solid red oak cold air return vent cover.

Easy Installation

Installing a cold air intake cover is a simple process. All that’s necessary are a few minutes and a screwdriver. The covers come with pre-drilled holes and screws.

Cold air return grilles can be installed in baseboards, on the wall, or on the ceiling. Homeowners should ensure they are buying a model that is compatible with where they want to put it.

Remember that when choosing sizes, always measure the duct opening. Product sizes are listed according to the duct size. The actual size of the product will be a bit larger.

Ready to check out some awesome cold air return grate styles? Feel free to browse our selection!

People Also Search For:

cold air return covers, cold air return vents, cold air return vent, cold air return vent covers, cold air return cover, cold air return grilles, cold air intake cover, cold air return floor grate, cold air return grate, cold air return vent cover, cold air return in floor, cold air registers, cold air return vent filter, cold air return grill, cold air return grille, cold air return registers

Scroll to Top